Image

Meerkat Online
Monitoring

WHAT IS MEERKAT?

Meerkat is a low cost, stand alone or cloud based, permanent condition monitoring system. It is a truly wireless product that messages you when pre-determined levels of machine vibration or temperature change.

Just think about the last time you were hit with an unplanned breakdown. Did anyone ask “Could this have been predicted?”. Well it could have been with our innovative condition monitoring system. Contact us and find out how Meerkat can save you thousands in unplanned downtime and lost production.

Meerkat is a very simple system to understand. It’s a fully wireless condition monitoring system.

Meerkat Login
Image

Simple yet
Powerful


Meerkat is a system that is designed to be fit-and-forget. It can be retrofitted to almost any machine in any industry. Normal operating conditions are learnt by the system and alert levels are then set.

When Meerkat detects a change, a visible alert is shown on the control panel and an SMS message is sent to your maintenance teams.

Just think how powerful that will be to your organisation? A machine letting you know it needs attention.

Enquire Now
Image

Benefits to you

Image
Prevent Downtime
Just think of the last time you had an unexpected plant failure, how much did it cost your operation in downtime, lost production and lost profit? Now don’t you wish you could have predicted and prevented the failure? With a Meerkat system you can.
Image
Easy to use
Meerkat is simple to install and can be installed on all your existing machinery. Once installed you can carry on with your maintenance tasks with peace-of-mind knowing the system is monitoring your machinery round-the-clock.
Image
Early Warning
When plant machinery starts to fail, it will never get better on its own. It’s often a matter of judgement and sometimes good luck whether the machine is removed from service or a breakdown stops your plant. Meerkat will let your maintenance teams know that a machine needs attention.
Image
Adaptable & Expandable
Meerkat is a fully modular system that can start off monitoring just a few machines and more sensors can be added to cover your entire plant.
Image
Improve Safety
Traditional route based monitoring often requires operators to be close to moving machinery and on occasions some machinery cannot be accessed at all due to confined spaces or machine guarding. Meerkat removes the need to put operators in potentially hazardous situations.
Image

Fully Online
Wireless

The system is now a full online wireless vibration analysis system. Vibration and temperature is measured via sensors attached to the motor, pump, gearbox of fan unit. The data is transmitted over a wireless network with nodes capable of transmitting up to 3km. The data is then send via a GSM gateway to the cloud. The data is analysed by the Meerkat software. An online dashboard is available to monitor the data but the beauty of the system is that it can alert you when predetermined thresholds have been breached.

Image

MeerkatONE
Broadband vibration and acceleration measured along with temperature.

Image

MeerkatPRO
Full FFT vibration and temperature

Image

MeerkatEx
Monitoring system for ATEX areas

May 9, 2023General, Meerkat News

Keep it simple stupid - online condition monitoring'Keep It Simple Stupid'.The KISS philosophy is something that I think we should all do more of, my aging brain certainly thinks it's the best way to go for sure.It's an approach that I f...

April 13, 2021

Benefits of online condition monitoring

Meerkat News

More and more people are seeing the benefit of having online condition monitoring systems installed on critical plant equipment. Josh is programming these base-stations for our largest installation of Meerkat so far. 405 vibration and te...

April 13, 2021

Increase productivity of your equipment

Meerkat News

Do you want to increase productivity from your equipment? Then listen to what your plant is doing. Remote condition monitoring doesn’t just monitor the health of your equipment. It can give you crucial information as to things happening ...

April 13, 2021

Early Warning of Failure

Meerkat News

Here’s a brilliant example of where online condition monitoring has an advantage over route-based condition monitoring. It shows how quickly things can change and how quickly an online system can respond in providing an early warning of ...

April 13, 2021

Remote online condition Monitoring

Meerkat News

This is the sort of information that can literally save you thousands of pounds in lost production, downtime and spoilt product. It is real data taken from a remote online condition monitoring system that is installed on a brick making p...

April 13, 2021

On-line condition monitoring

Meerkat News

There certainly is a growing interest for on-line condition monitoring of plant. But it might not be right for you….. If you’re happy with a run-to-failure system and the downtime costs that come with it, this post won’t interest you. If...

Image

Contact Us

If you’d like more information on how a Meerkat system can save you money and prevent downtime, please contact us by calling 01782 411021 or via one of the links below.